Page 1864 - Foton Workshop Manual - Tunland (AT)

41-12 TRANSMISSION（6HP21） - TRANSMISSION ASSEMBLY

(r) Screw out the transmission lower fixing bolt.
（4WD）

DANGER

Before operation, do support the transmission
using the jack, and take necessary protection
measures.

(s) Screw out the transmission lower fixing bolt,
disconnect the transmission from the engine,
and carefully take down the transmission
assembly.（4WD）

7 . Refit the transmission assembly.

(a) Raise the transmission assembly using the
jack, and put the transmission at the mounting
position.
DANGER

• •Do take necessary protection measures
when supporting the transmission with
41
the jack.
• Keep the transmission level as much as
possible to facilitate the installation.

(b) Refit these 6 fixing bolts of the hydraulic
torque converter.
NOTICE

• Before removal, rotate the crankshaft
pulley and keep each bolt in the holes as
shown in the left figure.
• Do take much care at refitting, and prevent
the bolt from falling into the flywheel
housing.

Page 1864