Page 1863 - Foton Workshop Manual - Tunland (AT)

TRANSMISSION（6HP21） - TRANSMISSION ASSEMBLY 41-11

(n) Screw out these 6 fixing bolts of the hydraulic
torque converter.
NOTICE

• Before removal, rotate the crankshaft
pulley and keep each bolt in the holes as
shown in the left figure.
• Do take much care at removal, and prevent
the bolt from falling into the flywheel
housing.

(o) Screw out the transmission upper fixing bolt.

DANGER

Before operation, do support the transmission
using the jack, and take necessary protection
measures.

(p) Screw out the transmission upper fixing bolt.
(4WD)

DANGER

Before operation, do support the transmission
using the jack, and take necessary protection
measures.

41

(q) Screw out the transmission lower fixing bolt,
disconnect the transmission from the engine,
and carefully take down the transmission
assembly.
DANGER

Before operation, do support the transmission
using the jack, and take necessary protection
measures.

Page 1863