Page 2243 - Foton Workshop Manual - Tunland (AT)

WIRING - SYSTEM CIRCUIT DIAGRAM 71-41

Description:

• Starter
The battery current flows from the engine compartment fuse box F3 to pin 3 of the
starter relay R3 to supply electric power. When the ignition switch is at ST, current
flows from fuse F17 in the interior fuse box to pin 1 of starter relay R3 and is
grounded at pin 2 of starter relay R3. When the coil is energized, a magnetic field
and the contact of starter relay R3 is closed. When current outputs from pin 5 of
starter relay R3 via pin 1 of the starter to the starter electromagnetic switch that is
energized, it will produce a magnetic field and close the starter contact.

When the battery current flows from the starter contact to the starter motor, the
energized motor will drive the engine flywheel.

: component position
71
NO. Ref. wiring harness NO. Ref. wiring harness
Engine compartment
A020 K006 Battery harness
harness

Front instrument
C037
harness

: connectors between wiring harnesses

Ref. wiring harness
NO. NO.
(connector position)
Front instrument harness and
engine compartment harness
C101 A302
(left side of instrument
crossbeam)
Battery harness and engine
K101 A110 compartment harness (under
battery)

Earthing

NO. Earth point
B1 Left A pillar

Page 2243