Page 233 - Foton Workshop Manual - Tunland (AT)

DIAGNOSTICS - ANTI-LOCK BRAKING SYSTEM (ABS) 04-87

(d) Use a multimeter to measure the resistance
between the pin 14, 26 of ABS/ESP connector
A006 and the groumd.
A006

13 12 11 10 9 8 7 6 5 4 3 2 1 Connection of the multimeter Standard value
24 23 22 21 20 19 18 17 16 15 14
38 37 36 35 34 33 32 31 30 29 28 27 26 25 04
14 26 A006（14）-A006
（26） about 60Ω

ftwxd041452

(e) Use a multimeter to measure the resistance
between the pin 14, 26 of ABS/ESP connector
A006 and the pin 9, 8 of electric time shared
A006 four-wheel drive connector C040.

13 12 11 10 9 8 7 6 5 4 3 2 1 Standard resistance（Check whether there
24 23 22 21 20 19 18 17 16 15 14
38 37 36 35 34 33 32 31 30 29 28 27 26 25 is open circuit）
C040
14 26
1 2 11 12 13 Connection of the
3 4 5 6 7 8 9 10 Standard value
16 17 18 19 20 21 22 23 multimeter
14 15 24 25 26
9 8 A006（14）-C040（9）
＜2Ω
A006（26）-C040（8）

ftwxd041477

Is the inspection result normal?
YES>To step 4.

NO> Repair or replace harness or connector.

4 . Replace electric time shared four-wheel drive
(a) Replace electric time shared four-wheel drive .
(b) Use a diagnostic apparatus to perform DTC verification procedures.
(c) Implement the steps to read sensor data stream.
(d) Check whether DTC exists and the data is normal.

Is the inspection result normal?
YES>Replace electric time shared four-wheel drive.

NO> To step 5.

5 . Replace ABS/ESP
(a) Replace ABS/ESP.
(b) Use a diagnostic apparatus to perform DTC verification procedures.
(c) Implement the steps to read sensor data stream.

Page 233