Page 235 - Foton Workshop Manual - Tunland (AT)

DIAGNOSTICS - ANTI-LOCK BRAKING SYSTEM (ABS) 04-89

U160208-HANDBRAKE SIGNAL INVALID VALUE (CAN SIGNAL)

Circuit Diagram

Combination 04
instrument
C013

Parking brake indicator light
29

W-B

C401
4 D302

1

Handbrake switch
D007

Self ground
ftwxd041478

Diagnostic step
NOTICE

• To implement the following steps, ensure that ABS is grounded properly.
• Before conducting electric diagnosis, do refer to the reference circuit diagram
and the element information.
• Before conducting measurement, check the pins of connectors for rupture,
looseness and rust, and ensure that the pins are contacted properly.
• If the connection is good, check the sensor signal voltage when moving the
connector and harness. If a fault occurs, the voltage display on the diagnostic
instrument will change.

1 . DTC inspection
(a) Ignition switch: OFF.
(b) Connect the diagnostic apparatus.
(c) Use the diagnostic apparatus, read the fault code.

Page 235