Page 375 - Foton Workshop Manual - Tunland (AT)

DIAGNOSTICS - ENGINE CONTROL SYSTEM 04-229

(f) Use a multimeter to measure the voltage
between the pin 1 of camshaft position sensor
connector E03 and the ground.
Standard voltage

Multimeter connection
Standard value
pin 04
E03（1）-ground 4.75～5.25 V

Is the inspection result normal?
YES>To step 3.
No > Maintain or replace the harness.

3 . Check camshaft position sensor harness
(a) Ignition switch: OFF.
(b) Disconnect the battery negative cable.
(c) Disconnect connector E03 of camshaft position sensor.
(d) Disconnect connector E01 of ECM.

(e) Use a multimeter to measure the resistance
between the pin 2, 3 of camshaft position
sensor connector E03 and the pin 63, 62 of
ECM connector E01 respectively.
Standard resistance

Multimeter connection
Standard value
pin

E03（2）- E01（63） ＜10 Ω
E03（3）- E01（62） ＜10 Ω

Page 375