Page 803 - Foton Workshop Manual - Tunland (AT)

DIAGNOSTICS - POWER WINDOW 04-657

(d) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is an open circuit)

Multimeter connection Standard value
04
J004 ＜ 2 Ω
8 7 6 5 4 3 2 1 J004（11）- ground
16 15 14 13 12 11 10 9

ftwxd041498

Check whether the result is normal?
Yes> Yes> go to step 5.
No > Maintenance or replace harness.

5 . Check harness and connector (power window switch, right rear door-BCM control
unit)
(a) Ignition Switch: OFF.

(b) Press down power window switch H001, right
rear door.

(c) Disconnect connector C035, BCM control unit.

Page 803