Page 805 - Foton Workshop Manual - Tunland (AT)
P. 805

DIAGNOSTICS - POWER WINDOW                              04-659

                                                           (d)    Measure the electrical resistance based on
                                                                  the value in the following form.
                                                                  Standard resistance (check whether there
                                                                  is an open circuit)

                                                            Multimeter connection          Standard value
                                                                                                                     04
                                                                H001(1)- ground                 ＜ 2 Ω













                 Check whether the result is normal?
                 Yes> Replace power window switch, right rear door.
                 No > Maintenance or replace harness.


                 7 .    Check harness and connector (power window motor, right rear door-BCM control
                        unit)
                 (a)    Ignition Switch: OFF.

                                                           (b)    Press down power window motor H004, right
                                                                  rear door

















                                                           (c)    Disconnect connector C033 , BCM control
                                                                  unit.


























                                                                                                         Page 805
   800   801   802   803   804   805   806   807   808   809   810