Page 817 - Foton Workshop Manual - Sauvana

START AND CHARGING - STARTER 18A-17

13. Inspect the rotor coil
(a). Set the rotor in a growler.
(b). While holding a thin strip of iron against the
rotor in parallel with its axis, turn the rotor
slowly. The rotor is normal if the iron strip
is not attracted to the rotor or it does not
vibrate.
WARNING
fuwx18A035
Clean the surface of the rotor thoroughly before
performing the test.

(c). Check the insulation between commutator
segments and rotor coils. The rotor coils
are properly insulated if no continuity is
present.

fuwx18A036
18A
(d). Check continuity between a segment and
another. It is normal if there is continuity.

fuwx18A037

14. Inspect the magnetic switch
(a). Coil short circuit test.
• Check that there is continuity between
the M terminal and body A.
• If there is no continuity, replace the
magnetic switch.

fuwx18A038

Page 817