Page 188 - Workshop Manual - Tunland (2017)

04-50 DIAGNOSTICS - SRS SYSTEM

Diagnostic steps

1 . Check clock spring

(a) Confirm the ignition switch is closed, and disconnect the negative pole of the battery
for more than 90 seconds.

04 (b) Dismantle horn button assembly and
disconnect the driver's SRS assembly
connector.
(c) Disconnect the connector of clock spring
C010.

(d) Check the resistance between clock spring
socket C010 and driver’s SRS assembly
connector.
Standard electrical resistance (check
whether there existent an open circuit)

Multimeter connection Standard value

C010 (1) Driver’s SRS
assembly connector (1)
＜ 2 Ω
C010 (2) Driver’s SRS
assembly connector (2)