Page 192 - Workshop Manual - Tunland (2017)
P. 192
04-54 DIAGNOSTICS - SRS SYSTEM
Diagnostic steps
1 . Check harness (SRS control module-lock spring)
(a) Turn off the ignition switch, and disconnect the negative pole of the battery for more
than 90 seconds.
04 (b) Dismantle horn button assembly and
disconnect the driver's SRS assembly
connector.
(c) Disconnect SRS control module connector
C016.
(d) Disconnect the connector of clock spring
C010.
(e) Connect the negative pole of the battery and
turn on ignition switch to “ON”.
(f) Disconnect the connector of clock spring
C010.
Standard voltage
Multimeter connection Standard value
C010 (1) ground
0V
C010 (2) ground
Check whether the result is normal?
Yes> go to step 2
