Page 2293 - Workshop Manual - Tunland (2017)

WIRING - SYSTEM CIRCUIT DIAGRAM 71-93

Description:

• The battery current flows from fuse F2 in the engine compartment fuse box, through
body fuse box fuse F7 to combination instrument pin 3, so to provide power for the
combination instrument.
When the ignition switch is in the ON/ST position, the current flows from fuse F26
in the body fuse box to combination instrument pin 1, ignition signal is generated.

• Fuel level indicator light
The current flows from combination instrument pin 13to fuel level sensor pin 3,
through the fuel level sensor pin 1 to combination instrument pin 14to check the
fuel level.

• Charging indicator light
The current flows from combination instrument pin 17to alternator pin 2, to check
if the alternator is in normal working status. 71
• Seat belt indicator light

The current flows from combination instrument pin 6and 5to seat belt warning switch
pin 1, grounded via warning switch pin 2, to check if the seat belt is fastened.
• Parking brake warning indicator light
The current from the instrument pin 29 output to the parking brake switch pin 1,
through its own grounding to detect whether hand brake is in service.

• Brake level indicator light
The current from the instrument pin 8 output to brake fluid sensor pin 1, through
ground of brake fluid sensor pin 2 to detect whether brake fluid level is normal.

: component position

NO. Ref. wiring harness NO. Ref. wiring harness

Engine compartment
A008 D006 Floor harness
harness
Engine compartment
A009 D007 Floor harness
harness
Engine compartment
A020 D013 Floor harness
harness

Front instrument
B001 Frame harness C013
harness
Front instrument
C037
harness

: connectors between wiring harnesses