Page 233 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - TRANSFER GEAR 04-95

Diagnostic steps

1 . Check operating voltage of the speedometer sensor

(a) Ignition Switch: OFF.

(b) Disconnect speedometer E001 connector
(c) Ignition Switch: ON. 04

(d) Use multimeter to measure voltage of
speedometer sensor connector E001 between
pin 1 and pin 2, pin 1 and ground respectively.
Standard voltage

Multimeter connection Standard value

E001 (1) - E001 (2)
Battery voltage
E001 (1) - ground
E001

ftwxd041350

Check whether the result is normal?
Yes> go to step 3
No> If both have no voltage, go to step 2. If there is voltage between pin 1 and ground
connection, repair the open circuit between pin 2 of the speed sensor connector E001
and pin 7 of combination instrument connector C013.

2 . Check supply circuit of speed sensor