Page 238 - Workshop Manual - Tunland (2017)

04-100 DIAGNOSTICS - TRANSFER GEAR

Diagnostic steps

1 . Check clutch switch

(a) Pedal and loosen clutch pedal.
(b) Disconnect the clutch switch connector.
(c) Check the clutch switch resistance
04
Multimeter connection Standard value
Pedal: C001(3) - C001(4) ＜ 2 Ω

Loosen: C001(3) - C001(4) >1KΩ

2 . Measure the electrical resistance based on the value in the following form.
(a) Switch over the ignition switch to “OFF”.

Standard electrical resistance (check
whether there existent an open circuit)

Multimeter connection Standard value

A024(39)-C001(4) ＜ 2 Ω

A024(29)-C001(3) ＜ 2 Ω

Check whether the result is normal?

Yes> replace engine control unit.
No> replace connection harness.