Page 319 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - POWER WINDOW 04-181

(c) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)

Multimeter connection Standard value
04
F14(30A)-C033（B8） ＜ 2 Ω

Check whether the result is normal?
Yes> go to step 3
No > Maintenance or replace harness.

3 . Check harness and connector (power window switch, driver’s door-BCM control
unit)
(a) Ignition Switch: OFF.

(b) Pull out power window switch J004, driver’s
door