Page 322 - Workshop Manual - Tunland (2017)

04-184 DIAGNOSTICS - POWER WINDOW

(b) Press down power window switch H001, right
rear door.

04

(c) Disconnect connector C035, BCM control unit.

(d) Measure the electrical resistance based on
the value in the following form.

Standard resistance (check whether there
is an open circuit)

Multimeter connection Standard value
H001(3)-C035（D8） ＜ 2 Ω

Check whether the result is normal?

Yes> go to step 6.
No > Maintenance or replace harness.

6 . Check harness and connector (power window switch, right rear door-ground)

(a) Ignition Switch: OFF.