Page 321 - Workshop Manual - Tunland (2017)
P. 321
DIAGNOSTICS - POWER WINDOW 04-183
(b) Pull out power window switch J004, driver’s
door
04
(d) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is an open circuit)
Multimeter connection Standard value
J004（11）- ground ＜ 2 Ω
Check whether the result is normal?
Yes> Yes> go to step 5.
No > Maintenance or replace harness.
5 . Check harness and connector (power window switch, right rear door-BCM control
unit)
(a) Ignition Switch: OFF.
