Page 323 - Workshop Manual - Tunland (2017)
P. 323
DIAGNOSTICS - POWER WINDOW 04-185
(b) Press down power window switch H001, right
rear door.
04
(d) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is an open circuit)
Multimeter connection Standard value
H001(1)- ground ＜ 2 Ω
Check whether the result is normal?
Yes> Replace power window switch, right rear door.
No > Maintenance or replace harness.
7 . Check harness and connector (power window motor, right rear door-BCM control
unit)
(a) Ignition Switch: OFF.
(b) Press down power window motor H004, right
rear door
