Page 378 - Workshop Manual - Tunland (2017)
P. 378
04-240 DIAGNOSTICS - POWER DOOR LOCK CONTROL SYSTEM
(b) Use multimeter to measure the resistance
between stitch 7 of connector J007 of lock
assy of left front door and the ground.
Standard electrical resistance (check
whether there existent an open circuit)
04 Multimeter
Standard value
connection
J007(7)-ground ＜ 2 Ω
Check whether the result is normal?
Yes> go to step 8
No > Maintenance or replace harness.
8 . Check circuit of body controller
(a) Disconnect body controller C036 connector.
(b) Use multimeter to measure the resistance
between. stitches E27, E28 of connector C036
of the body controller and the ground.
Standard resistance (check whether there
is short circuit)
Multimeter
Standard value
connection
C036(E27)-ground
＜ 2 Ω
C036(E28)-ground
Check whether the result is normal?
