Page 500 - Workshop Manual - Tunland (2017)
P. 500

04-362                                DIAGNOSTICS - HORN


           (a)    Ignition Switch: OFF.

                                                      (b)    Disconnect the connector C009 of lock spring.
                                                      (c)    Disconnect the horn switch connector.



      04












                                                      (d)    Measure the electrical resistance based on
                                                             the value in the following form.

                                                             Standard electrical resistance (check
                                                             whether there existent an open circuit)

                                                       Multimeter connection          Standard value
                                                       C009 (3) - horn switch             ＜ 2 Ω



                                 C009





                                            ftwxd041384

           Check whether the result is normal?

           Yes> Replace the clock spring.
           No > Maintenance or replace harness.

           6 .    Check the harness and connectors (horn switch - ground)
           (a)    Ignition Switch: OFF.


                                                      (b)    Disconnect the horn switch.
   495   496   497   498   499   500   501   502   503   504   505