Page 625 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - ASSEMBLY INSTRUMENT 04-487

(a) Use a multimeter to measure the resistance
between pin 43 of connector E01 of engine
control module and the ground.
Standard resistance (check whether there
E01
is short circuit)

Multimeter connection Standard value 04
73 96
49 72
E01 (43) -ground ≤ 2 Ω
25 48
1 24

52

ftwxd041295

Check whether the result is normal?

Yes> go to step 6
No > Replace the engine control module.

6 . Check the CAN bus circuit
(a) Ignition Switch: ON.

(b) Disconnect the connector C013 of
combination instrument.

ftwx831083