Page 163 - 25270_1

#25270-EYAL - 25270_pnim_eyal.1.1 | 6 - B | 18-05-15 | 13:28:56 | SR:-- | Black
25270-EYAL - 25270_pnim_eyal.1.1 | 6 - B | 18-05-15 | 13:28:56 | SR:-- | Yellow
25270-EYAL - 25270_pnim_eyal.1.1 | 6 - B | 18-05-15 | 13:28:56 | SR:-- | Magenta
#

Appendix 2 25270-EYAL - 25270_pnim_eyal.1.1 | 6 - B | 18-05-15 | 13:28:56 | SR:-- | Cyan

ELECTROMAGNETIC COMPATIBILITY
Guidance and manufacturer’s declaration - electromagnetic emissions
EMC according to IEC 60601-1-2 ed.4
The Product is intended for use in the electromagnetic environment specified below.
The customer or the user of the Product should assure that it is used in such an
®
environment. The ProPex II is intended for use in professional healthcare facility or
Emission test Compliance Electromagnetic environment - guidance home healthcare electromagnetic environment specified in this chapter.
®
The Product uses RF energy only for its The customer or the user of the ProPex II should assure that it is used
RF Emissions Group 1 internal function. Therefore, its RF emissions in such an environment.
CISPR 11 are very low and are not likely to cause any Changes or modifications to this ProPex II not expressly approved by
®
interference in nearby electronic equipment.
the manufacturer may result in increased emissions or decreased
®
RF Emissions Class B immunity performance of the ProPex II and could cause EMC issues
CISPR 11 with this or other equipment. This ProPex II is designed and tested to
®
The Product is suitable for use in all
Harmonic establishments, including domestic comply with applicable regulations regarding EMC and shall be installed
Emissions Not applicable establishments and those directly connected to and put into service according to the EMC information stated as follows.
IEC 61000-3-2
the public low-voltage power supply network
Voltage that supplies buildings used for domestic
fluctuations/ Not applicable purposes. Use of portable phones or other radio frequency (RF) emitting
flicker emissions ®
IEC 61000-3-3 equipment near the ProPex II may cause unexpected or adverse
operation.
®
The ProPex II must not be used adjacent to, or stacked with, other
®
equipment. If adjacent or stacked use is necessary, the ProPex II
must be tested to verify normal operation in the configuration in which
it is being used.

160/172 B EU PIIL DFU PRT / Rev.07 / 02-2018 (Old ZF 190292.X) B EU PIIL DFU PRT / Rev.07 / 02-2018 (Old ZF 190292.X) 165/172