Page 165 - 25270_1
P. 165

#25270-EYAL - 25270_pnim_eyal.1.1 | 6 - A | 18-05-15 | 13:28:56 | SR:-- | Black
                                                                                       25270-EYAL - 25270_pnim_eyal.1.1 | 6 - A | 18-05-15 | 13:28:56 | SR:-- | Yellow
                                                                                       25270-EYAL - 25270_pnim_eyal.1.1 | 6 - A | 18-05-15 | 13:28:56 | SR:-- | Magenta
                                                                                       #

 Appendix 1       The recommended Radiation Levels of RF Wireless                      25270-EYAL - 25270_pnim_eyal.1.1 | 6 - A | 18-05-15 | 13:28:56 | SR:-- | Cyan           10
                  Communication Equipment specified in this Paragraph must be
 ELECTROMAGNETIC COMPATIBILITY  complied with
 EMC according to IEC 60601-1-2 ed.3
                 Guidance and manufacturer’s declaration - electromagnetic emissions
                     ®
 Changes or modifications to this product not expressly approved by the   The ProPex  II is intended for use in professional healthcare facility or home
 manufacturer may result in increased emissions or decreased immunity   healthcare electromagnetic environment specified below. The customer or the user or
                     ®
 performance of the product and could cause EMC issues with this or   the ProPex  II should ensure that it is used in such an environment.
 other equipment. This product is designed and tested to comply with   Emission test  Compliance  Electromagnetic environment - guidance
 applicable regulations regarding EMC and shall be installed and put into
                                                     ®
 service according to the EMC information stated as follows.  The ProPex  II uses RF energy only for its
           RF Emissions                   internal function.
           CISPR 11         Group 1       Therefore, its RF emissions are very low and
 Use of portable phones or other radio frequency (RF) emitting   are not likely to cause any interference in                                                                   11
                                          nearby electronic equipment.
 equipment near the product may cause unexpected or adverse
 operation.  RF Emissions   Class B
           CISPR 11
 The product must not be used adjacent to, or stacked with, other   Harmonic
 equipment. If adjacent or stacked use is necessary, the product must   Emissions   Not applicable  The ProPex  II is suitable for use in
                                                     ®
 be tested to verify normal operation in the configuration in which it is   IEC 61000-3-2  professional healthcare facilities or domestic
 being used.                              establishments.
           Voltage
           fluctuations/
           flicker emissions   Not applicable
           IEC 61000-3-3



























 158/172  B EU PIIL DFU PRT / Rev.07 / 02-2018 (Old ZF 190292.X)  B EU PIIL DFU PRT / Rev.07 / 02-2018 (Old ZF 190292.X)  167/172
   160   161   162   163   164   165   166   167   168