Page 366 - Divyank Tyagi
P. 366
332 | ChApter 9 ConCeptual Design anD Design analysis
14. Make sure Model is still selected in the Create tab and choose the Line tool. Connect the
arc you just created to the other three points, completing the shape. The final form will
look like Figure 9.11 with the reference lines turned off.
Figure 9.11
adding model lines
to connect the
other points
15. As the last step, you need to apply a surface. Select the model lines you just created either
by using the Tab-select method or selecting everything and then using the filter tool
to isolate Lines (Generic Model). From the contextual tab in the ribbon, choose Create
Form ➢ Solid Form. You’ll be prompted with the option to create a solid or a plane.
Choose the plane, which will be the option on the right (Figure 9.12). The result should
look like the image to the right in the figure.
Figure 9.12
Creating a form out
of the model lines
c09.indd 332 5/3/2014 11:01:05 AM
