Page 154 - Corkjoint E-Catalogue

STORAGE

Rebox should be stored in a location that prevents it from being damaged by force and should be kept under
®
cover in a dry location to prevent any corrosion. The product is supplied to the end-user on pallets and fully
shrink wrapped, to help protect during delivery and storage.

QUALITY ASSURANCE

Rebox is manufactured and assembled under a full Quality Assurance System. A Mill Test Certificate is
®
available upon request for the steel reinforcement bar that is installed in the production of the boxes.

DELIVERY CONDITIONS

Upon delivery, the product needs to be checked and verified by the end user that it complies fully to the
project’s specification and design requirements and that final approval for use is to be given by the project’s
engineer. The product also needs to be checked for any damage and if so, reported immediately to
CORKJOINT for inspection prior to the product being installed/used. Once delivery of the product has been
accepted,the ownership and full liability for its use, passes to the end user. For full product warranty and liability
conditions pertaining to the product,refer to CORKJOINT’s Limited Product Warranty, which is available upon
request.

HEALTH AND SAFETY INFORMATION

®
Short lengths of Rebox are light-weight and can be handled by one person, longer boxes can be heavy and
should be lifted by two people or by lifting apparatus equipment. Protective gloves should be worn when
handling the boxes, when removing box covers and during reinforcement bar straightening. Once the
reinforcement bars have been straightened, extra care should be taken as the exposed bars, prior to lapping to
the main reinforcement, can be harmful or cause serious injury to the human body if impact is to take place.

DISCLAIMER

The information and the recommendations relating to the application and end use of this product are given
in good faith and are based on the information provided by the manufacturer of the product and/or the
Company’s current knowledge and experience in connection with the product when properly stored, handled
and applied under normal conditions and no liability of final function at the job site is assumed. In practice, the
differences in materials substrates and actual site conditions are such that no warranty in respect of
merchantability of or fitness for particular purpose, nor any liability arising out of any legal relationship
whatsoever, can be inferred either from this information, or from any written and/or oral recommendations, or
from any other advise offered by the Company. The Company also has no express or implied knowledge of any
particular purpose for which the product is required and any such information given will not be taken into
account in the supply of this product. No responsibility or liability by the Company will be accepted for misuse,
misreading or derivation from recommended guidelines in respect of this product and the user shall
determine the suitability of the product for his intended use and assume all risks and liability in connection
therewith. The information contained in our brochure may change at any time without notice. Any use of this
product; Rebox in any application should be approved as suitable for use/application by the Design Engineer
®
and Project Manager.

Effective Date: 14 NOVEMBER 2019

CORKJOINT (MALAYSIA) SDN BHD CORKJOINT (MALAYSIA) SDN BHD CORKJOINT (SINGAPORE) PTE LTD CORK JOINTING SYSTEMS AUSTRALIA
383102-H 0100562101046 200716724-K
No. 51, Jalan BRP 8/2, THAILAND REGIONAL FOREIGN OFFICE No. 10 Buroh Street #02-26 & 27, Unit 2, 18 Farrow Circuit Seaford Rise,
Bukit Rahman Putra Industrial Park, P.O. Box 133 Bangna Post Office, West Connect Building, South Australia 5169, AUSTRALIA
47000 Sungai Buloh, Selangor, MALAYSIA Bangkok 10260, THAILAND SINGAPORE 627564
+603 6148 8010 +66 949 023 133 +65 6455 9331 +61 432 423 103
+603 6148 8020 info@corkjoint.com +65 6455 8535 admin@corkjointingsystems.com

info@corkjoint.com | corkjoint.com © Corkjoint 2018. All Rights Reserved. Page 8