Page 687 - Wago_AutomationTechnology_Volume3_2015_US.pdf

Accessories for Carrier Rails 11

685

End stop for DIN 35 rail Angled support bracket Rail end cap,
End stop width 6 mm / 0.236 in for DIN 35 rail (7.5 mm/0.29 in high)

28 mm/ 1.1 in

45 mm/1.77 in
M 5
35°
Ø 7 <__48__>
>18 <
<___ 60 ___>
<______ 72 ______>
Item No. Pack. Unit Item No. Pack. Unit Item No. Pack. Unit
End stop, for DIN 35 rail Angled support bracket, Rail end cap,
6 mm/0.236 in wide without screw for DIN 35 rail (7.5 mm/0.29 in high)
249-116 100 (4 x 25) 210-148 10 209-109 50
End stop, for DIN 35 rail Screw M 5 x 8
249-117 50 (2 x 25) 210-149 100

Snap on - That’s it!
Assembling the WAGO screwless end stops is as simple
and quick as snapping a WAGO railmounted terminal
block onto the rail.
Without any tools!
This way rail-mounted terminal blocks are safely secured at
low cost against any mouvement on all carrier rails DIN 35
acc. to DIN EN 50022 (35 x 7.5 mm; 35 x 15 mm).
Entirely without screws!
The „secret“ of the excellent tight fit lies in the two small
clamping plates which keep the end stop in position, even if
the rails are mounted vertically.
Simply snap on - and forget!
Snap on ...
In addition, costs are considerably reduced when using
large numbers of end stops.
A further advantage is that three marker receptacles for all
WAGO marker systems for rail-mount terminal blocks and a
snap-in hole for WAGO adjustable height group marker
carriers offer individual marking possibilities. 11

... that's it!!