Page 8 - Destaco - Automatic Tool Changers

RTP-200 Series

Automatic Tool Changers | Technical Specifications, Dimensions

Specification:
Max. Payload W: 180 Kg [400 lb]
Loading Capacity:
Max. Tensile T: 2670 N [600 lb]
Max. Compressive C:
3560 N [800 lb]
Max. Moment (Mx/My/Mz):
1580 Nm [14000 in.-lb.]

M X, Y
M Z
X
W
C
T

[4.53] [1.00]
115
[.45] 25.4
11.5 [3.1496] SIDE D [0.35]
(M8 LENGTH) ISO9409-1-A80 Ø80 9
MOUNTING PATTERN C L 6 x [M8]
EQUALLY SPACED
SIDE C (SEE DETAIL)
[3.15]
[1.77] Ø80 [1.77]
45 45
[M8]
[1.9685 S.F. ]
[0.39] Ø50 H7
10 [0.3543]
[1.77] (M5 LENGTH) H9 [1.77]
45 Ø8 9 DEEP 45
SIDE A
(3) HOLES (3) HOLES
[0.35] FOR MODULES [M5] FOR MODULES [0.25]
9 (SEE DETAIL) (SEE DETAIL) 6.4
SIDE B
[0.0787] [1.85]
Ø8 H8 - 2 DEEP DETAIL OF 47.1
MODULE
SIDE C FIXATION
SIDE A
(3) HOLES
[1.77] [1.77] FOR MODULES
[0.35] 45 45
9 (SEE DETAIL)
SIDES A, B, C & D
ARE IDENTICAL

FAILSAFE OPERATION:
4-WAY VALVES WITH A SPRING UNLOCK QC/ LOCK
RETURN ARE RECOMMENDEDTO RQC
MAINTAIN AIR PRESSURETO THE
LOCK PORT DURINGEMERGENCY
SIDE B
STOPCONDITIONS. EXHAUST PRESSURE EXHAUST
UNLESS OTHERWISE NOTED ALL TOLERANCES ARE AS SHOWN BELOW
IMPERIAL([ IN.]) METRIC (MM)
DIMENSIONS ARE THIRD ANGLE ALL DOWEL HOLESARE SF (SLIP FIT). METRIC THREADS 0.00= ±.01 [0]=[±.25]
SYMMETRICAL ABOUT PROJECTION LOCATIONAL TOLERANCE COURSE PITCH 0.000 =±.005 [0.0]=[±.13]
CENTERLINE ±.0005"OR [±.013MM] 0.0000=±.0005 [0.00]= [±.013]

Dimensions and technical information are subject to change without notice EE-ATC-8
READY TO COUPLE POSITION COUPLED POSITION
Z RQC CANCOUPLED TO RTP
AT UP TO A 2.54 [0.10] GAP
M X, Y
M Z
X RQC [3.00]
76.2
RTP
W
C
READY TO COUPLE POSITION COUPLED POSITION
T
RQC CANCOUPLED TO RTP
AT UP TO A 2.54 [0.10] GAP
RQC
[3.10]
78.74
RTP
READY TO COUPLE POSITION COUPLED POSITION
READY TO COUPLE POSITION COUPLED POSITION
RQC CAN COUPLED TO RTP
AT UP TO A 2.54 [0.10] GAP RQC CANCOUPLED TO RTP
AT UP TO A 2.54 [0.10] GAP
RQC
[2.75] RQC
69.9 [3.50]
88.9
RTP
RTP