Page 189 - Parker - Parker Pneumatic

Catalog PDN1000-3US Actuator Products – Guided Cylinders
Parker Pneumatic P5L Series

Asymmetrical Torque Capacity

• Standard Composite w/ Chrome Plated or include the weight of the support rods and tooling plate
Stainless Steel Rods and are based on a bearing life of 10 million cycles under
• Oversized Composite w/ Chrome Plated or a dynamic loading condition. For an equivalent static load
Stainless Steel Rods capacity multiply the information in these graphs by 1.5.
• Recirculating Ball Bearings w/ Carbon or Dynamic loading is defined as a load which is affixed to the
Stainless Steel Rods actuator tooling plate during the extend or retract motion of
• Self Aligning Ball Bearings w/ Carbon or the actuator. Capacities are based on bearing and shafts only.
Mounting bolts/hardware should be investigated per customer
Stainless Steel Rods application. An asymmetrical load is defined as a perpendicular
The graphs on the following two pages illustrate the maximum load applied at some horizontal distance, “m” from the center
suggested asymmetrical load at a given actuator stroke and of the tooling plate.
distance (d) from the face of the tooling plate. The graphs

B P5L Thrust Slides
20mm Bore Size 25mm Bore Size 32mm Bore Size
40 60 100
(355) (533) (888)
30 40 (666)
75
Torque, Nm (lb-in) (178) Torque, Nm (lb-in) (355) Torque, Nm (lb-in) (444)
(266)
50
20
Guided Cylinders
Actuator Products
20
10
25
(89) (178) (222)
0 0 0
0 120 240 300 0 120 240 360 480 0 200 400 600
(4.7) (9.4) (11.8) (4.7) (9.4) (14.2) (18.9) (7.9) (15.7) (23.6)
Stroke + “d”, mm (in) Stroke + “d”, mm (in) Stroke + “d”, mm (in)
P5T
Series
40mm Bore Size 50mm Bore Size 63mm Bore Size
160 300 600
(1421) (2664) (5328)
P5L
Series
240
120 (2131) 400
Torque, Nm (lb-in) (710) Torque, Nm (lb-in) (1066) Torque, Nm (lb-in) (3552)
(1066)
180
1598)
80
120
HB
200
Series
40
(355) 60 (1776)
(533)
0 0 0
0 200 400 600 0 200 400 600 0 200 400 600
( )7.9 ( )15.7 ( )23.6 (7.9) (15.7) (23.6) (7.9) (15.7) (23.6)
P5E
Series
Stroke + “d”, mm (in) Stroke + “d”, mm (in) Stroke + “d”, mm (in)
80mm Bore Size 100mm Bore Size
1000 1500
(8880) (13320)
1200
750
(6660)
Torque, Nm (lb-in) (4440) Torque, Nm (lb-in) (10656) LEGEND
900
(7992)
500
Standard Composite
600
Oversized Composite
(5328)
250
(2220) 300 Recirculating Ball Bearing
(2664) Self Aligning Ball Bearing
0 0
0 200 400 600 0 300 600 900
(7.9) (15.7) (23.6) (11.8) (23.6) (35.4)
Stroke + “d”, mm (in) Stroke + “d”, mm (in)
B188 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics