Page 217 - Parker - Parker Pneumatic

Catalog PDN1000-3US Actuator Products – Rodless Cylinders
Parker Pneumatic OSP-P Series

OSP-P Series

Standard Features:
• Double-acting with adjustable cushions
• With magnetic piston for position sensing
• Standard stroke lengths to 6000mm. Long stroke versions
available upon request
• End cap can be rotated 4 x 90° to position ports as desired
Optional Features:
• Clean room cylinders
• Stainless steel screws Operating information
B • Slow speed lubrication Operating pressure: 117 PSIG (8 bar)
• Fluorocarbon seals
-10°F to 80°F (14°C to 176°C)
Temperature range:
• Single end porting Filtration requirements: Filtered, nonlubricated
• Integrated valves compressed air
• Integrated bearing options

Material specifications
Cylinder profile Anodized aluminum
Carrier (piston) Anodized aluminum
Actuator Products
Rodless Cylinders
End caps Aluminum, lacquered / plastic (P10)
Features Sealing bands Corrosion resistant steel
Characteristics Description Seals NBR (Option: Fluorocarbon)
Galvanized steel
Type Rodless cylinder Screws Option: stainless steel
Series OSP-P
Series
Dust covers, wipers Composite
OSP-P
Stroke length 5.5m (216 inches)
Double-acting, with cushions and
System
magnetic piston Weight (mass) kg
Mounting See drawings Cylinder series Weight (Mass) kg
P1X
Series
Air connection Threaded (Basic cylinder) At 0 mm stroke per 100 mm stroke
Weight (mass) See table below OSP-P10 0.087 0.052
Installation In any position OSP-P16 0.22 0.1
Prelubricated at the factory OSP-P25 0.65 0.197
P1Z
Series
(additional oil mist lubrication not
Lubrication OSP-P32 1.44 0.354
required)
Option: special slow speed grease OSP-P40 1.95 0.415
OSP-P50 3.53 0.566
OSP-P63 6.41 0.925
GDL
Series
OSP-P80 12.46 1.262
Size Comparison
P10 P16 P25 P32 P40 P50 P63 P80

B216 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics