Page 222 - Wago_Rail-MountedTerminalBlockSystems_Volume1_2015_US.pdf
P. 222
Disconnect Terminal Blocks for Test and Measurement with Pivoting Knife Dis-
5 connect, 280 Series
220
Power distribution using adjacent jumper. Pivoting knife disconnect Pivoting knife disconnect clearly indicates circuit state by
Knife disconnects used to disconnect individual outputs. defined, notched positions “ON” <–> “OFF”
Adjacent
jumper
Diagram of the assembly as shown in the above picture.
Power distribution using knife disconnect in supply line,
disconnection of all outputs.
Adjacent Staggered
jumper jumper
Diagram of the assembly as shown in the above picture. Staggered jumpers for sophisticated circuit requirements. Diagram of the assembly as shown in the picture on the
Push jumpers down firmly until fully inserted. left.
CAGE CLAMP
®
clamps the following
copper conductors:* fine-stranded,
also with tinned
solid stranded single strands
* For aluminum conductors, see notes in Section 14.
