Page 33 - Parker - Energy Products Division - Multitube (Instrument and Heat Trace Tubing Products)

Chemical Processing and Refineries
Catalog Number 4200-M-2
Back to Table of Contents

4041-2101 Temptrace Power
Connection Kit with Junction Box

4041-2101 Temptrace Electric Power
Connection Kit for SL and SH Series
Self-Regulating Bundles

Power Connection Kit Contains:
1 Molded junction box consisting of : Base - Box - Lid - Hardware
4 Heater grommets (grommet used based upon heater type)
1 Pipe strap 1" – 3-1/2"
1 RTV-103BLK
1 Three position terminal block
1 Mounting screw for terminal block
1 Caution label

An easily installed combination power connection and Ground Fault Equipment Protection Devices (GFEPDs):
waterproof seals for single and double tube bundles. The IEEE standard (515-1989) for heating cables requires the
use of GFEPDs with a nominal 30 milliampere trip level for
Caution: The heater will come in contact with the power feed wires “piping systems in classified ares, those areas requiring a high
in the junction box. Make sure that the temperature rating of the degree of maintenance, or which may be exposed to physical
power feed wire insulation is adequate for the heater used. abuse or corrosive atmospheres.”
Approvals:

FM – Factory Mutual Approved
Ordinary Locations
UL Listed
Hazardous (Classified) Locations
Class I, Division 2, Groups B, C and D
Class II, Division 2, Groups F and G
Class III, Division 2
CSA Certified for use in ordinary areas

ATEX Approved Kits Available

Parker Hannifin Corporation
29 30 Energy Products Division