Page 37 - Parker - Energy Products Division - Multitube (Instrument and Heat Trace Tubing Products)

Chemical Processing and Refineries
Catalog Number 4200-M-2
Back to Table of Contents

Parker Temptrace™ Feed Through
(PTFT) Kit

Parker PTFT kits provide a water tight seal where the heat trace tubing
bundle enteres into a junction box or instrument enclosure.

Molded
Cabinet "B" Feed "C"
Feed Cable "A"
Through Range Length Wall Hole Through Minimum
Part Min/Max Nominal Thickness Size Hole Expanded
Number Max Size I.D.
0.75 - 1.50" 4.5" (11.4 0.375" (9.5 2" (5.1 1.60" (4.1 1.70" (4.3
PTFT 1.50
(19 - 38 mm) cm) mm) cm) cm) cm)
0.75 - 2.0" 7.0" (17.8 0.375" (9.5 2.36" (6.0 2.10" (5.1 2.75" (7.0
PTFT 2.00
(19 - 51 mm) cm) mm) cm) cm) cm)
1.43 - 2.75" 7.0" (17.8 1.0" (25.4 3.50" (8.9 2.75" (7.0 2.75" (7.0
PTFT 2.75
(19 - 70 mm) cm) mm) cm) cm) cm)

PVC Pipe "C" Cable "A" Cabinet "B" Feed
Fitting Wall Drill Hole Through
Range Min/ Length
Style Part Thickness Size Hole
Max Nominal
Number Max Size
1.50 - 3.25" 10" (25.4 1.125" 4.50" 3.50" (8.9
PTFT 3.25
(38 - 83 mm) cm) (28.6 mm) (11.4 cm) cm)
2.00 - 4.50" 10" (25.4 1.25" (28.6 5.00" 4.50"
PTFT 4.50
(51 - 114 mm) cm) mm) (12.0 cm) (11.4 cm)
2.00 - 5.00" 12" (30.5 1.125" 5.50" 5.00"
PTFT 5.0
(51 - 114 mm) cm) (28.6 mm) (13.2 cm) (12.0 cm)

Heat Shrinkable Boots (HSBs)

Parker heat shrink boots (HSB) are designed to prevent moisture
from entering the ends of Parker Temptrace™ bundles. The dash

number represents the number of breakouts in each boot. The
boots can be used on 1/4", 3/8", or 1/2" tubes, or as a seal for the
heating cable

HSB-1 HSB-2

Before Heat Grommet Selection
After Heat Shrinking
Shrinking Chart
Part Number
Body Leg(s) Body Leg(s) Part Tube
I.D. I.D. Number Size O.D.
I.D. Thick Length *I.D. Thick Length
(inches)
HSB-1 1.50 - 0.23 0.16 6.00 No Legs
GESKO-2 1/8
HSB-2 3.40 1.50 0.90 0.16 3.00 0.30 0.12 1.20
GESKO-4 1/4
HSB-3 2.40 1.00 0.90 0.16 2.30 0.30 0.12 1.20
GESKO-6 3/8
HSB-4 2.30 1.00 0.98 0.16 3.00 0.28 0.12 1.20
GESKO-8 1/2
HSB-5 3.70 1.40 1.27 0.16 4.70 0.58 0.12 2.00
HSB-6 5.20 2.00 1.75 0.16 6.00 0.60 0.12 2.00
*Where "After Shrinking" I.D. is larger than tube size in bundle, a silicone grommet or RTV should be used in conjunction with the
boot to ensure a complete seal. (See grommet selection list below or RTV data listed in this catalog.)
Parker Hannifin Corporation
33 34 Energy Products Division