Page 34 - Parker - Energy Products Division - Multitube (Instrument and Heat Trace Tubing Products)

Chemical Processing and Refineries Catalog Number 4200-M-2

Back to Table of Contents

4041-5300 Temptrace Universal Kit for Self-
Regulating Bundles

4041-5300 Temptrace Electric Splice or Tee
Connection Kit for SL and SH Series
Self-Regulating Bundles

Connection Kit Contains:

(1) 3/4” Pipe Stand (3) Ring Terminals
(1) Sealing Grommet (2) Cable Entry Fittings
(4) Stainless Steel Pipe Straps (1) 3/4” Pipe Plug
(2-large, 2-small) (1) Grounding Screw
(1) 3 Hub Box (2) RTV-103BLK
(1) Box Cover (1) SS Label
(6) Wire Nuts (2) Reducing Bushings
(2) Butt Splice Connectors (3) 1” Heat Shrink Tubes
(1) SK-612 (Seal Patch Kit) (3) 3” Heat Shrink Tubes

Kit can be used to make one input power connection or one input
power splice connection or one splice/tee connection as well as two
end termination and RTV for bundle end seal.
An easily installed combination power splice and tee
for Self-Regulating Bundle.
Caution: The heater will come in contact with the power feed wires
in the junction box. Make sure that the temperature rating of the
power feed wire insulation is adequate for the heater used.
Ground Fault Equipment Protection Devices (GFEPDs):
The IEEE standard (515-1989) for heating cables requires the
use of GFEPDs with a nominal 30 milliampere trip level for “piping
systems in classified areas, those areas requiring a high degree
of maintenance, or which may be exposed to physical abuse or
corrosive atmospheres.”

Parker Hannifin Corporation
31 Energy Products Division 32