Page 90 - Critical Control flipbook_Neat

FALL FROM HEIGHT

Critical Controls

Barriers, Railings, and Covered Openings Pre-Job Plan

Physical barriers like handrails, guardrails or coverings and warning signs are in Check if there are any safer ways to do the task BEFORE starting.

place for any edges or floor openings with fall hazards. Perform specific assessment for hazards, controls needed, and authorize the

job through permit to work.

Risk Job-Speci c Rescue Plan Permit-
Assessment Procedure to-Work

min. 95cm

gap < 50cm

min. Personal Fall Protection System
min. 10cm

Anyone working within 2 metres of unguarded openings or edges (1.8 metres or

higher) must wear a personal fall protection system (restraint/arrest) attached to

Certified Work Access Equipment an approved anchor point.

Certified structures, platforms, and work access equipment (permanent, SAFETY HARNESS
INSPECTION TAG
ID Number:
temporary, mobile) are designed, set-up, inspected, and approved for use by an Inspection Date:
authorized and competent person before use. Next Inspection

Inspected by:

22kN

A B

A = Anchor
B = Body support C
(harness and
suspension trauma
foot loop)
C = Connectors (lanyards,
lifelines and
associated devices)

© 2022 Holcim