Page 200 - Icon Ridge Hardware & Fixing Technology Catalog

Fixing technology

Drop-in Anchor ED-DW 15 Galvanized Steel

• Drop-in Anchor with DYWIDAG® internal thread 1) DW 15
• For subsequent attachment of anchor bars
• Safe installation due to thread unaffected by dirt
• After removal of the anchor rod, plug does not protrude from bore
hole
• Suitable for concrete C12/15-C50/60 or pressure-resistant natural
stone
Examples of use:
• Versatile anchors in formwork
• Inexpensive and quick mounting in in-situ concrete
• Fixing of formwork supports and temporary fall protection

Loads and characteristic values Angle of inclination 0° 15° 30° 45° 60° 75° 90°
Non-cracked concrete
Recomm. load C12/15 Recomm.F [kN] 17,3 16,9 16,8 17,4 18,7 20,6 22,6
>C25/30 Recomm.F [kN] 19,3 18,7 18,3 18,6 19,5 21,1 22,6

Technical Data
Spacing and edge distance
Embedment h ef h ef 80
Depth minimum spacing s min s min 600
Minimum edge distance c min c min 300
Minimum component thickness h min h min 160
Installation data
Drill hole diameter d o d o 22
Drill hole depth h 0 h 0 80
Article No. Article Description QTY Thread length L th L th 35
8250 15 DROP-IN ANCHOR ED DW 15 25 Rod/bolt DW 15 minimum insertion length 28
1) DYWIDAG® internal thread (DYWIDAG® is a registered trademark of Walter Bau AG)

Expansion tool E-SW for ED-DW 15 hammer-in anchor

Article No. Article Description QTY
8250 151 EXPANSION TOOL FOR ED DW 15 1

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 200