Page 396 - Icon Ridge Hardware & Fixing Technology Catalog

Chemical products for construction

Hybrid Construction Adhesive

Properties:
• Single-component, hybrid-based adhesive with high level of initial
grip
• Diverse uses
• High final tensile strength
• For absorbent and non-absorbent substrates
• Can also be used without a primer
• Odourless, neutral
• Free from isocyanates, plasticisers, solvents and silicones
Areas of application:
• Suitable for bonding diverse materials, e.g., assemblies of stone,
concrete, masonry, glass, mirrors, glazed surfaces, porcelain, ep-
oxide and polyester sheets, hard PVC, polyurethane, stainless steel,
anodised aluminium, copper, zinc, lead, lacquered wood and HPL
sheets
• Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene,
natural stone and bituminous substrates
• Not suitable for expansion joints, long-term exposure to water or
chlorine
Usage:
• Contact surfaces must be firm, clean, dry, oil-free and grease-free
• Apply the adhesive in vertical strands
• Carrying out adhesion and compatibility tests before starting the
work is recommended

Technische Daten
Basis: 1K-SMP
Colour: white
Film property: elastic
Viscosity (at +20 °C): high viscosity, paste-like
Shore A hardness: approx. 55
Density (according to EN 542 at +20 °C): 1,57 g/cm³
Tensile strength: 2,20 MPa
Skin formation time (at 23 °C,
50 % rel. humidity): approx. 15 min
Hardening speed
(at 23 °C, 50 % rel. humidity): 2 – 3 mm / 24 h
Working temperature: +5 °C to +40 °C
Temperature resistance
(in hardened state): -40 °C to +90 °C
Shelf life
(dry, between +5 °C and +25 °C): 18 months

Article No. Article Description QTY
6880 19 310 C(450G)CONSTR. ADHESIVE HYBRID e 25

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 396