Page 411 - Icon Ridge Maintenance & Service Catalog

Drilling, Milling, Tapping and Threading

Carbide coated burrs DIN 8032/8033, shape 1

• Cross toothing for high chipping performances at hard and soft
materials, e. g. stainless and high-strength steels, welding seams,
grey cast iron, hard plastics etc.
• Creates a flat surface when running smoothly, thus less reworking
• They produce short, blunt chips which do not stick on clothes and
are harmless for the skin
• For use with grinders
• Similar to DIN 8032 / 8033
Art.-No. 5975 1 16:
• Without face spline

Technical Data
Article No. Article Description QTY D1 mm D2 mm L1 mm L2 mm Recommended speeds
5975 1 3 CARBIDE COATED BURR FORM 1 D3 1 ü 3.0 3.0 14.0 38.0 rpm
5975 1 6 CARBIDE COATED BURR FORM 1 D6 1 ü 6.0 6.0 18.0 50.0 65,000 – 80,000
5975 1 10 CARBIDE COATED BURR FORM 1 D10 1 ü 9.6 6.0 19.0 64.0 25,000 – 40,000
5975 1 12 CARB.BURRS CT/ZYAS FO.1 D12 1 ü 12.7 6.0 25.0 70.0 15,000 – 25,000
5975 1 16 IT/CARB.CUTT.KZ/ZYA FORM1 D16 1 16.0 6.0 25.0 70.0 12,500 – 24,000
6,000 – 20,000
(CT = Cross toothing)

HD KV/WRC carbide rotary burrs, shape 2

• Radius end shape
• Cross-cut teeth for high cutting performance on hard and soft
materials, e.g. stainless and high-strength steels, welding seams,
grey cast iron, hard plastics etc.
• Runs quietly and creates smooth surfaces to minimise the amount of
rework
• For use in die grinders
• Similar to DIN 8032 / 8033

Technical Data
Article No. Article Description QTY D1 mm D2 mm L1 mm L2 mm Recommended speeds rpm
5975 2 3 CARB.BURRS HD CT/WRC FO.1 D3 1 ü 3.0 3.0 14.0 38.0 65,000 – 80,000
6.0 6.0 18.0 50.0 25,000 – 40,000
5975 2 6 CARB.BURR CT/WRC FORM 2 D6 1 ü
5975 2 10 CARB.COAT.BURR CT/WRC FO.2 D10 1 ü 9.6 6.0 19.0 64.0 15,000 – 25,000
12.7 6.0 25.0 70.0 12,500 – 24,000
5975 2 12 CARB.BURR CT/WRC FO.2 D12 1 ü
(CT= Cross-cut teeth)

HD KV/KUD carbide rotary burrs, shape 3

• Ball shape
• Cross-cut teeth for high cutting performance on hard and soft
materials, e.g. stainless and high-strength steels, welding seams,
grey cast iron, hard plastics etc.
• Runs quietly and creates smooth surfaces to minimise the amount of
rework
• For use in die grinders
• Similar to DIN 8032 / 8033

Technical Data
Article No. Article Description QTY D1 mm D2 mm L1 mm L2 mm Recommended speeds rpm
5975 3 3 CARB.BURR CT/KUD FO.3 D 3 1 ü 3.0 3.0 12.5 38.0 65,000 – 80,000
5975 3 6 CARB.BURR CT/KUD FO.3 D 6 1 ü 6.0 6.0 4.7 50.0 25,000 – 40,000
5975 3 10 CARB.BURR CT/KUD FO.3 D 10 1 ü 9.6 6.0 8.0 54.0 15,000 – 25,000
5975 3 12 CARB.BURR CT/KUD FO.3 D12 1 ü 12.7 6.0 11.0 56.0 12,500 – 24,000
(CT = Cross toothing)

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 411