Page 413 - Icon Ridge Maintenance & Service Catalog

Drilling, Milling, Tapping and Threading

HD KV/RBF carbide rotary burrs, shape 7

• Semi-circular arch shape
• Cross-cut teeth for high cutting performance on hard and soft materi-
als, e.g. stainless and high-strength steels, welding seams, grey cast
iron, hard plastics etc.
• Runs quietly and creates smooth surfaces to minimise the amount of
rework
• For use in die grinders
• Similar to DIN 8032 / 8033

Technical Data
Article No. Article Description QTY D1 mm D2 mm L1 mm L2 mm Recommended speeds rpm
5975 7 3 CARB.BURR CT/RBF FO.7 D 3 1 ü 3.0 3.0 14.0 38.0 65,000 – 80,000
5975 7 6 CARB.BURR CT/RBF FO.7 D 6 1 ü 6.0 6.0 18.0 50.0 25,000 – 40,000
5975 7 10 CARB.BURR CT/RBF FO.7 D 10 1 ü 9.6 6.0 19.0 64.0 15,000 – 25,000
5975 7 12 CARB.BURR CT/RBF FO.7 D 12 1 ü 12.7 6.0 25.0 70.0 12,500 – 24,000
(CT = Cross-cut teeth)

HD KV/KEL carbide rotary burrs, shape 8

• Rounded cone shape
• Cross-cut teeth for high cutting performance on hard and soft materi-
als, e.g. stainless and high-strength steels, welding seams, grey cast
iron, hard plastics etc.
• Runs quietly and creates smooth surfaces to minimise the amount of
rework
• For use in die grinders
• Similar to DIN 8032 / 8033

Technical Data
Article No. Article Description QTY D1 mm D2 mm L1 mm L2 mm Recommended speeds rpm
5975 8 3 CARB.BURR CT/KEL FO.8 D 3 1 ü 3.0 3.0 10.0 38.0 65,000 – 80,000
5975 8 10 CARB.BURR CT/KEL FO.8 D 10 1 ü 9.6 6.0 30.0 76.0 15,000 – 25,000
5975 8 12 CARB.BURR CT/KEL FO.8 D 12 1 ü 12.7 6.0 32.0 77.0 12,500 – 24,000
(CT = Cross-cut teeth)

HD KV/SKM carbide rotary burrs, shape 9

• Pointed cone shape
• Cross-cut teeth for high cutting performance on hard and soft materi-
als, e.g. stainless and high-strength steels, welding seams, grey cast
iron, hard plastics etc.
• Runs quietly and creates smooth surfaces to minimise the amount of
rework
• For use in die grinders
• Similar to DIN 8032 / 8033

Technical Data
Article No. Article Description QTY D1 mm D2 mm L1 mm L2 mm Recommended speeds rpm
5975 9 3 CARB.BURR CT/SKM FO.9 D 3 1 ü 3.0 3.0 8.0 38.0 65,000 – 80,000
5975 9 10 CARB.BURR CT/SKM FO.9 D 10 1 ü 9.6 6.0 16.0 64.0 15,000 – 25,000
5975 9 12 CARB.BURR CT/SKM FO.9 D 12 1 ü 12.7 6.0 22.0 71.0 12,500 – 24,000
(CT = Cross-cut teeth)

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 413