Page 75 - Icon Ridge Presents ATORN

Drilling tools \ Core drills /Twist drill sets, HSS/HSE
HSS core drill ( DIN 344 )
for universal use up to 1000 N/mm 2

Z
HSS
3
Application: Advantage:
For core drilling pre-drilled, pre-cast or punched  stable grinding combined with the three blades
holes. ensure that any mis-alignments and run-out of the
pre-made holes are corrected
Execution:
 3-blade design
Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat.
2
No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC
11410 22 20 10 6 4 40 50 40 35 30 25 40 20
Cutting edge Ø (mm) Cutting edge length (mm) Length (mm) f steel 700  (mm/U) 11410...
Ident. No.
4.8 74 108 0.05 048
5 74 108 0.05 050
5.8 80 116 0.05 058
6 80 116 0.06 060
6.8 93 133 0.06 068
7 93 133 0.06 070
7.8 100 142 0.07 078
8 100 142 0.07 080
8.8 107 151 0.07 088
9 107 151 0.08 090
9.8 116 162 0.08 098
10 116 162 0.08 100
11 125 173 0.08 110
11.75 134 184 0.08 117
12 134 184 0.08 120
Prod. Gr. 117
Twist drill set HSS/E 5xD ( DIN 338 )
in metal box

No. 11037 900, 11042 051, 11042 251, No. 11037 920, 11042 061, 11042 261, No. 11037 930, 11042 071, 11042 271, No. 11042 011, 11042 111, 11049 011
11049 051 11049 061 11049 071
D = 1–10 mm, increasing by 0.5 mm D = 1–10.5 mm, increasing by 0.5 mm D = 1-13 mm, increasing by 0.5 mm
+ core drill

No. 11042 021, 11042 121, 11049 021 No. 11042 081
D = 6–10 mm, increasing by 0.1 mm D = 1-5.9 mm, increasing by 0.1 mm

Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat.
2
No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC
11037900-930 40 20 10 10 8 60 80 70 45 40 30 30 10 30 10 10 10
11042011-081 30 20 10 40 60 70 45 40 30 20 10 25
11042111-271 30 20 10 40 60 70 45 40 30 20 10 25
11049011-071 40 20 10 10 10 50 45 40 35 40 30 20 10 30 6 6 6
Surface TiNALOX Vaporised TiN TiN
Cutting material HSSE HSS HSS HSSE
Type U4 (no. 11037) N (no. 11020) N (no. 11022) TLP (no. 11030)
Composition of set Pitch of drill Ø Number of pieces in assort- 11037... 11042... 11042... 11049...
ment/set (PCS) Ident. No. Ident. No. Ident. No. Ident. No.
1,0-10,0 0.5 mm 19 900 051 251 051
1,0-10,5 0.5 mm + core-hole drill 24 920 061 261 061
1,0-13,0 0.5 mm 25 930 071 271 071
6,0-10,0 0.1 mm 41 - - 021 121 021
1,0-10,0 0.1 mm 91 - - 081 - - - -
1,0-5,9 0.1 mm 50 - - 011 111 011
11042... = Prod. Gr. 1AA
11037... = Prod. Gr. 1AG
11042... = Prod. Gr. 112
11049... = Prod. Gr. 112
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 75

0085_EN_2018_KERN[21841798]-j.indd 85 12/17/2018 3:31:09 PM