Page 74 - Making Instruction Work
P. 74
chap 6 3/4/97 4:14 PM Page 62
62 making instruction work
1. Open hood.
2. Locate spark plugs.
3. Cover fender with protective material.
4. Remove ignition wires.
5. Remove plugs.
6. If plugs are cracked or worn out, replace them, and then
go to Step #12. If not, go to Step #7.
7. Clean the plugs.
8. Check gap in each plug.
9. Adjust gap as necessary.
10. Test the plugs.
11. Replace plugs.
12. Re-connect ignition wires.
13. Check engine performance.
14. If OK, go to step 16.
15. If not OK, complete the designated steps.
16. Clean tools and equipment.
17. Clean any grease from car.
18. Complete required paperwork.
When is task complete? Engine runs smoothly.
