Page 118 - RotF - Electrical Specification_Neat
P. 118

PARTICULAR ELECTRICAL SPECIFICATION
                                 Version 2014-2


               1.1    INTRODUCTION

                      This specification is intended for use by Design & Build contractors employed to undertake
                      electrical works associated with kitchen up-grade  works in McDonalds Restaurants. This
                      specification should be read in conjunction with the Technical Specification for Electrical
                      Installations Generally and typical sample installation drawings provided with the Tender
                      pack.

                      The content of individual projects will vary, the Electrical Contractor is to seek clarification of
                      the full scope for each individual project from the Project Manager, projects will be inclusive
                      of but not limited to the following core elements:

                       •  Kitchen equipment modifications
                            New prep table
                            Centre island modifications
                       •  Replacement counter
                       •  Digital order and display system
                       •  Digital tablet table

                      Projects may also be inclusive of the following additional items:

                       •  Kitchen lighting modifications/replacement
                       •  Freezer and chiller expansion
                       •  Lobby and toilet up-grade
                       •  Lobby expansion
                       •  New lobby air lock and air curtain
                       •  Managers office move
                       •  Changes in the external car park, additional drive through lane
                       •  Changes to the patio area and lighting
                       •  Modification of the main supply to site

                      The Electrical Contractor should note that he will be responsible for producing Design and
                      Construction  Drawings to meet the relevant British Standards and McDonalds Standard
                      Electrical Specification for this refurbishment  for the review and approval of the Project
                      Manager.

                      Where required these Contractor Design Drawings must be submitted to Building Control for
                      their approval. It is important the Electrical Contractor submits this information to Building
                      Control at the earliest opportunity to incorporate any required modifications to the design.

                      This document should be used as a guide only and not as a ‘brief’ for the works, for more
                      detailed information on engineering requirements for electrical services in McDonalds
                      Restaurant refer to Technical Specifications for Electrical Installations Generally.



                                                McDonalds Restaurants Ltd
                                                           1
   113   114   115   116   117   118   119   120   121   122   123