Page 31 - Legend Owners Manual

Full Stand-Up Top
A Full Stand-Up Top is for on-water use and provides complete protection while underway.

1. Lift Stand-Up Top in boot position.
2. Unhook rear tubular stability bars.
3. Pull back tubular stability bars and insert locking clip into place.
4. Unzip storage boot and stow, then unfold Stand-Up Top.
5. Pull front and middle tubular stability bars forward (loosen tension strap).
6. Snap down front windshield snaps and tighten torsion strap.
7. Locate side aft curtains, and first snap curtains to gunnel then zip into place.
8. Locate rear enclosure and snap all available rear snaps.
9. Zip rear enclosure until fully closed.
10. Pull back bars in slider to tighten top.

LIFT TOP INTO
BOOT POSITION

SIDE AFT
CURTAINS
TUBULAR Located on both
STABILITY BARS sides in the boat.

Note
Not intended for use while trailering. Not intended for use during winter storage.

31