Page 32 - Legend Owners Manual
P. 32

Travel Covers
        1.   Place cover in bow of boat. Enter boat and proceed through to bow.
        2.   Locate pointed section of cover (also has pocket for trolling motor).
        3.   Hook pointed section over bow and pull cover back while exiting the boat to ensure cover lays
            properly over entire boat.
        4.   For full windshield models, ensure the centre of windshield is closed.
        5.   Unfold cover over each side of hull.
        6.   Install snaps down each side of gunnel, in splashwell, and on transom.
        7.   Hook ratchet hooks to tie down points (either engine bolts or chrome hoops on transom).
        8.   Ratchet each side of straps tightly.
        9.   Check for tight fit around the length of the hull.
                                                ANCHOR SNAPS
                    SUPPORT BARS
                    Ensure support bars are
                    straight within boat. Use
                    height adjustment knob.

            ANCHOR SNAPS










                                         ANCHOR SNAPS






           ANCHOR SNAPS
           POCKET FOR
       TROLLING MOTOR







                                            Note
                                            Anchor snaps are specially marked with the
                                            wording “One Way Pull” and should be snapped
                                            in place first. You will find on the backside the
                                            snap will have a flat surface.


     32
   27   28   29   30   31   32   33   34   35   36   37