Page 33 - Legend Owners Manual
P. 33
Maintenance
We recommend that maintenance and repairs be performed by your local Legend dealer. If you will
be carrying out basic maintenance on your boat, check with your Legend dealer to make sure you
are using proper tools, supplies and equipment. Always read the instructions on cleaning products
and make sure they are safe to use on marine materials.
Mercury Motor
Refer to the Mercury Owner’s Manual for recommended frequencies and detailed information about
engine care and maintenance.
Aluminium Hulls
Clean aluminium hulls with clear water and a mild marine detergent. Do not use harsh chemicals
or abrasives. Remove algae, scum or other marine growth while the hull is still wet. They will be
much harder to remove if they have the chance to dry out. Legend Boats recommends a product
like BABE’S Boat Bright which is a non-abrasive product designed to clean and protect your boat’s
surface. It enhances the finish of your boat by applying a light wax surface plus a UV protectant.
Fiberglass Hulls
Normally, you can remove surface dirt with clean water but to remove stubborn dirt scrub gently
with a mild marine detergent. The finish should be washed, buffed and polished at least once each
season to restore the original gloss.
Important!
If you use a power buffer or polisher, be very careful. Keep the buffer moving to keep the surface
from overheating.
Bilge (Non Pontoon Boats)
If your boat has remained in the water between excursions, check the bilge before you use your boat.
if you remove your boat from the water, remove the plug to drain the water from the bilge before
transporting.
Important!
If you removed the bilge drain plug, be sure to put it back in before launching your boat.
A small amount of water in the bilge is usually not a major concern. For excessive amounts of water,
investigate for water leaks and have it repaired immediately. To clean the bilge, run it until the pump is
dry. Remove all sand, dirt or foreign material and make sure all strainers are clean.
33
