Page 91 - 2018_IRC

BUILDING PLANNING

WALL

15 IN.
WALL
30 IN.

WALL
30 IN.
MIN.
21 IN.
CLEARANCE

21 IN.
CLEARANCE 24 IN. CLEARANCE IN
FRONT OF OPENING
SHOWER

WATER CLOSET
OR BIDET
WALL
WALL
15 IN. 15 IN.

TUB

21 IN.
CLEARANCE 21 IN.
CLEARANCE
WALL

TUB

WATER CLOSETS WALL
For SI: 1 inch = 25.4 mm.
FIGURE R307.1
MINIMUM FIXTURE CLEARANCES

considered to be a hazardous location where the bottom position and within 24 inches (610 mm) of the hinge
exposed edge of the glazing is less than 60 inches (1524 side of an in-swinging door.
mm) above the floor or walking surface and it meets either Exceptions:
of the following conditions:
1. Decorative glazing.
1. Where the glazing is within 24 inches (610 mm) of
either side of the door in the plane of the door in a 2. Where there is an intervening wall or other per-
closed position. manent barrier between the door and the glazing.
2. Where the glazing is on a wall less than 180 degrees 3. Where access through the door is to a closet or
(3.14 rad) from the plane of the door in a closed storage area 3 feet (914 mm) or less in depth.

66 2018 INTERNATIONAL RESIDENTIAL CODE ®
Copyrighted © 2017 by, or licensed to, ICC (ALL RIGHTS RESERVED); licensed to UL, LLC pursuant to License Agreement with ICC. No further reproductions authorized or distribution authorized.
ANY UNAUTHROIZED REPRODUCTION OR DISTRIBUTION IS A VIOLATION OF THE FEDERAL COPYRIGHT ACT AND THE LICENSE AGREEMENT; AND SUBJECT TO CIVIL AND CRIMINAL PENALTIES THEREUNDER.