Page 46 - QR CIMAR LASER SCREED

SERVICE AND MAINTENACE
SERVICE CHECKING
1. OBSERVE SERVICE INTERVALS
 Using the hour meter as a guide, perform all recommended services at hourly intervals indicated

on the following pages. You should keep a service record.
 Use the correct fuels and lubricants.

2. DISPOSE THE WASTE PROPERLY
 Use leakproof containers when draining hazardous fluids. Do not use food or beverage containers

that may mislead someone into drinking from them.
DO NOT pour waste onto the ground, down a drain, or into any water source.
3. AVOID HIGH-PRESSURE FLUIDS
 Escaping fluid under pressure can penetrate the skin and cause serious injury.
 Relieve pressure before disconnecting hydraulic or other lines. Tighten all connections before
applying pressure.
IF AN ACCIDENT OCCURS, SEE A DOCTOR IMMEDIATELY. Any fluid injected into the skin must be
surgically removed within a few hours or gangrene may result.

4. SHUT THE ENGINE OFF
 ALWAYS shut the engine OFF before attempting any repairs or working on any moving parts on or

inside the machine, including any part of the hydraulic system.
 NEVER work on any part of the hydraulic system or the engine when the machine is hot.

5. TURN THE ENGINE STOP SWITCH OFF
 ALWAYS turn the Engine Stop Switch, and the Ignition Switch OFF when working on the electrical

system.

6. USE PROPER TOOLS
 ALWAYS service your screed with the proper tools and be particularly careful when changing

precision components.

44