Page 11 - QR CIMAR CONCRETE CUTTER TC3

TC3-F400D/TEESIN/MAN/01/15 Compile by CJ

• Do not refill the fuel tank while the engine is running or while the engine is
still hot. Do not operate the concrete cutter with known leaks in the fuel system.
Use only Engine manufacturer recommended fuel and oil.

3.3) Mechanical Precautions

• Prior to perform service, maintenance, or cleaning procedures, always allow the
engine to cool completely.

• Do not alter or adjust any part of the concrete cutter or engine that is assembled
and supplied by the manufacturer.

• Always follow and complete preventive maintenance and routine plan (page 17)
and engine (follow engine manufacturer’s recommendations) maintenance.

3.4) Chemical Precautions

• Avoid body contact with fuels, oils, and lubricants used in the concrete cutter
and engine. If swallowed, seek medical treatment immediately. Do not induce
vomiting if fuel is swallowed. For skin contact, immediately wash with soap and
water. For eye contact, immediately flush eyes with clean water.

3.5) Misc. Precautions

Prolonged exposure to noise levels above 85 dBA is hazardous to hearing. Always
wear approved hearing protection when operating or working around the Concrete Cutter
when it is running.

WARNING! The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be applied by the operator.

For technical questions, please call +65 - 66431213 9
For Products Enquiry, please call +65 - 67581211