Page 16 - QR CIMAR CONCRETE CUTTER TC3
P. 16
TC3-F400D/TEESIN/MAN/01/15 Compile by CJ
10. Do always wear appropriate personal protective equipment including head, ear
and eye protection plus gloves and safety footwear.
11. Don't apply pressure and force your diamond blade through the cut. The weight of
the machine will suffice. Increased pressure means increase wear.
12. Don't let excessive heat be generated at the cutting edge of the blade.
13. Do ensure adequate water supply
14. Do ensure that the blade cuts parallel to the wheel axis.
15. Do follow the manufacturers recommended pulley sizes and operating speeds for
specific blade diameters.
16. Do tighten drive belts to ensure full available power.
17. Don't force the blade on blade shaft or mount blade on undersized spindle.
18. Don't force the machine so that the blade rides up out of the Cut.
19. Don't operate machine with damaged or open blade guard.
5.3) Cutting Direction:
1.) To achieve optimal cutting efficiency it is recommended to cut according to the
direction stated on the blades or machines.
Blade 14
Concrete Wall
For technical questions, please call +65 - 66431213
For Products Enquiry, please call +65 - 67581211