Page 112 - QR KLINDEX EXPANDER850AT-RXt

ASSEMBLY, TRANSPORTATION AND STORAGE

At this point, the operator can choose whether to l NOTICE
move the appliance in manual or automatic mode. – In “Grinding” mode if the lever of the
Manual mode switch for the direction of rotation re-
– Set the switch to "MAN" mains in the "STOP" position, the appli-
ance will not move.
MAN AUTO
– With the appliance connected to the
– move the appliance with the directional joystick. mains power supply, make sure that
once the direction of rotation has been
Automatic mode selected, the planetary begins to turn. If
– Set the switch to "AUTO" the appliance is powered by the battery,
the planetary remains stationary.

– move the appliance acting on the single axis joystick,
select the direction and speed of the appliance by
simply moving the joystick forwards and backwards.
By leaving the joystick in the required position, the
appliance will continue to move at the speed and in
the direction set

MAN AUTO

LEFT– select the direction of rotation of the planetary;RIGHT– turn the offset knob to the right if the appliance
-- to the left, the planetary rotates in an anti-clock- tends to move to the left, turn it to the left if the
wise direction appliance tends to move to the right.
-- middle, motor off
-- to the right, the planetary rotates in a clockwise 0
direction
LEFT RIGHT
STOP
If the radio control is not used for at least 3 min-
PLANETARY utes, it will deactivate (the green TX LED goes off).
To restore operation, press and hold the rest but-
ton on the right side of the radio control for ap-
proximately 3 seconds.

22 www.klindex.com - Made in Italy