Page 30 - QR KLINDEX EXPANDER850AT-RXt

BATTERY

4.3 Radio control battery

4.3.1 Replacing the radio control battery

l NOTICE
– Before removing the battery, make sure
that the appliance is stationary and the
emergency button on the radio control
has been pressed.

When the battery status LED starts flashing (two
flashes every 20 seconds), this means that the battery
needs to be replaced.

To replace the battery:
– press down on the battery and lift the end up to re-

move the battery from the radio control (1)
– follow the same procedure to remove the battery

from the charger (2) on the back of the electric panel

1

2

– insert the charged battery in the radio control, re-
peating the above procedure in reverse order. Make
sure it is blocked

– insert the flat battery in the charger on the side of
the electric panel (repeating the above procedure in
reverse order). Make sure it is blocked

– make sure that the battery is recharged.

There are three LEDs on the charger behind the elec-

tric panel which indicate the level of charge of the ap-

pliance battery:

– Red light; battery flat

– Orange light; battery charging

– Green light; battery 100% charged

16 www.klindex.com - Made in Italy